FUNDAMENTALS OF MATERIALS SCIENCE · CHAPTER 13 · GRAND FINALE

Fracture & Failure of Materials III

High-Temperature Creep, Residual Stress, Environmental Cracking & Book Epilogue
LECTURE 36 OF 36 · § 13.5 – § 13.8 & EPILOGUE · GRAND SYNTHESIS
“Order gives materials their skeleton, defects give them their joints, and evolution gives them life.”Fundamentals of Materials Science · Epilogue: The Symphony of Order, Defects, and Evolution
Liang Wumse3d.com · Smart Classroom · Lecture 36 of 36
Order (Lattice Skeleton) · Defects (Vacancy & Dislocation Joints) · Evolution (Coupled-Field Symphony)
→Space Next O Overview P Pen L Laser T Theme F Fullscreen
WARM-UP · THREE FINAL CHALLENGES FROM TIME, INTERNAL STRESS & ENVIRONMENT

Why Do 1000 °C Blades Shun Fine Grains, Peened Gears Last 10× Longer, and Sound Bolts Snap Days Later?

QUESTION 01 · GRAIN-SIZE REVERSAL

Should Grains Be Fine or Coarse?

Grain refinement raises yield strength and lowers the DBTT at room temperature—yet jet-engine turbine blades above \(1000\,^\circ\mathrm{C}\) eliminate every grain boundary as single crystals. Why do beneficial grain boundaries become a liability at high \(T\)?

QUESTION 02 · TAMING INTERNAL STRESS

Stress Without External Load?

Unloaded welds can cold-crack on the shop floor, yet bombarding a 300M steel landing gear with high-velocity shot boosts fatigue life \(5\text{–}10\times\). How does invisible residual stress rewrite the crack-tip \(K\) factor?

QUESTION 03 · SILENT DELAYED FRACTURE

Why Do Torqued Bolts Snap Days Later?

Tension alone does not break it, nor does trace moisture corrode it—yet an electroplated high-strength bolt torqued normally snaps into “rock-candy” facets hours or days later. What did \(\mathrm{H}\) atoms and \(\mathrm{Cl^-}\) ions do at the crack tip?

Today's Finale: Power-Law Creep & Ashby Maps \(\to\) Residual Stress & Shot Peening \(\to\) Environmental Cracking \(\to\) Functional Failure & 13-Chapter Synthesis.

§ 13.5 – § 13.8 & Epilogue · Grand Finale
LECTURE STRUCTURE · § 13.5 – § 13.8 & BOOK EPILOGUE

Unifying Diffusional Creep, Residual Stress & Chemo-Mechanical Cracking into the Grand Score

  1. Creep & Kê Peak3-stage curve · \(\sigma^n\mathrm{e}^{-Q_c/RT}\)
    Kê GB peak · SX blades
    § 13.5.1
  2. Ashby Map & LMP\(\sigma/G\text{–}T/T_{\mathrm{m}}\) mechanism map
    \(P_{\mathrm{LM}}=T(\log t_r+C)\)
    § 13.5.2–13.5.3 · 2D
  3. Residual StressType I / II / III scales · XRD
    300M peening closure
    § 13.6 · Case
  4. Environmental CrackingSCC film rupture · HEDE/HELP
    CF erases \(\sigma_e\) · Bolt delay
    § 13.7 · Case
  5. Epilogue & SynthesisLi-ion \(L_c\) · Solder LCF–creep
    Order · Defects · Evolution
    § 13.8 & Epilogue
§ 13.5 – § 13.8 & Epilogue · Lecture 36 Roadmap
01
PART 01 · § 13.5.1 – § 13.5.3

High-Temperature Creep, Kê Peak, Ashby Maps & Larson–Miller Life

Above \(0.3\text{–}0.4T_{\mathrm{m}}\), vacancy diffusion unlocks dislocation climb and viscous grain-boundary sliding—handing deformation and rupture over to time.
  1. Three Creep Stages, Power-Law \(Q_c\approx Q_{\mathrm{self}}\), Ting-Sui Kê Peak & Grain-Size Reversal05
  2. Michael Ashby's Deformation-Mechanism Map (\(\sigma/G\text{–}T/T_{\mathrm{m}}\)): Five Regimes & Contours06
  3. Larson–Miller Extrapolation \(P_{\mathrm{LM}}=T(\log t_r+C)\) & Interactive Sandbox (M12·05)07
§ 13.5.1 · POWER-LAW CREEP, STRESS EXPONENT \(n\) & TING-SUI KÊ (1913–2000)

\(Q_c\approx Q_{\mathrm{self}}\) Proves Vacancy-Controlled Climb; the Kê Peak Confirms Viscous GB Sliding

Three Creep Stages & Power-Law Equation (Eq. 13.38)

\(\dot{\varepsilon}_s=A\,\sigma^n\exp\!\left(-\frac{Q_c}{RT}\right),\qquad Q_c\approx Q_{\mathrm{self}}\)
  • Dynamic Balance Across Stages: Stage I primary deceleration (hardening wins) \(\to\) Stage II steady-state creep \(\dot{\varepsilon}_s\) (hardening balances recovery, governing service life) \(\to\) Stage III tertiary acceleration (necking + GB cavity coalescence).
  • Mechanism Diagnosis via \(n\): \(n=1\) diffusional creep (Nabarro–Herring \(\propto d^{-2}\) / Coble \(\propto d^{-3}\) Newtonian flow); \(n=3\text{–}8\) dislocation climb creep; \(n\gt 8\) power-law breakdown into exponential glide \(\exp(\beta\sigma)\).

Answering Q1: Ting-Sui Kê's GB Peak & Grain-Size Reversal

  • Ting-Sui Kê (Pioneer of Internal Friction): Invented the Kê torsion pendulum (1946), discovered the grain-boundary internal-friction Kê peak (1947), and proposed the Kê disordered-atom-group GB model (1949)—proving experimentally that high-\(T\) grain boundaries slide viscously.
  • Temperature Reversal of Grain Size: Low \(T\) demands fine grains (Hall–Petch + lower DBTT); superplastic forming (\(T\gt 0.5T_{\mathrm{m}}\)) also wants fine grains (GB sliding); yet high-\(T\) creep resistance demands coarse grains or single crystals—severing Coble fast paths (\(\propto d^{-3}\)) and GB cavity nucleation, backed by \(\gamma'\) precipitates and slow-diffusing \(\mathrm{Re,W}\).
§ 13.5.1 · Power-Law Creep, Kê Peak & SX Blades
§ 13.5.2 · MICHAEL ASHBY (1972) DEFORMATION-MECHANISM MAPS: \(\sigma/G\text{–}T/T_{\mathrm{m}}\)

Mapping Glide, Power-Law Creep, Superplasticity & Diffusion onto One Master Chart

  • Four Rules for Reading Fig. 13.19 (ordinate normalized by shear modulus \(G\)): ① Two mechanisms share equal \(\dot{\varepsilon}\) along field boundaries; inside each field the fastest mechanism rules. ② High \(\sigma/G\), low \(T/T_{\mathrm{m}}\) is dislocation glide (cold working). ③ Moderate \(\sigma\) & high \(T\) is climb-controlled power-law creep with downward-sloping \(\dot{\varepsilon}\) contours (hot rolling \(\sim 1\text{ s}^{-1}\)). ④ Low \(\sigma\), high \(T\) is \(n=1\) diffusional creep: since both Coble and N–H scale linearly with \(\sigma\), their boundary is stress-independent (vertical dotted line); fine grains open an \(n\approx 2\;(m\approx 0.5)\) superplastic wedge.
§ 13.5.2 · Ashby Deformation-Mechanism Map (Fig. 13.19)
§ 13.5.3 · LARSON–MILLER PARAMETER \(P_{\mathrm{LM}}=T(\log t_r+C)\) & EXTRAPOLATION TRAP

Predicting \(10^4\text{ h}\) Service at \(700\,^\circ\mathrm{C}\) from \(100\text{ h}\) Tests at \(800\,^\circ\mathrm{C}\)—Only Within One Regime

\(\begin{gathered}\dot{\varepsilon}_s t_r\approx\text{const}\implies t_r=t_0\exp\!\left(\frac{Q_c(\sigma)}{RT}\right)\\ P_{\mathrm{LM}}=T(\log t_r+C)=\frac{Q_c(\sigma)}{2.303R}\;\;(T\text{ in K},\;t_r\text{ in h},\;C\approx 20)\\ \text{Larson–Miller check: }1023(\log 1000+20)=1088(\log t_r+20)\implies t_r\approx 42.3\text{ h}\end{gathered}\)
  • Time–Temperature Equivalence: \(800\,^\circ\mathrm{C}/100\text{ h}\) maps to \(700\,^\circ\mathrm{C}/1.8\times 10^4\text{ h}\); for example, raising \(T\) from \(750\,^\circ\mathrm{C}\) to \(815\,^\circ\mathrm{C}\) slashes life from \(1000\text{ h}\) to \(42.3\text{ h}\).
  • Golden Rule of Extrapolation: Crossing into Coble diffusion at lower \(\sigma,T\) drops \(Q_c\) abruptly—blind LMP extrapolation dangerously overestimates rupture life.
§ 13.5.3 · Monkman–Grant & Larson–Miller Law
02
PART 02 · § 13.6 – § 13.7

Residual Stress, Shot-Peening Closure & Environmental Cracking

Self-equilibrating internal stresses and aggressive species (\(\mathrm{Cl^-},\mathrm{H}\)) can silently fracture static bolts—or be harnessed via shot peening into a \(10\times\) fatigue shield.
  1. Type I / II / III Residual-Stress Scales, Quench & Weld Origins, PWHT & XRD \(\Delta(2\theta)\)09
  2. Case 13.4: 300M Landing-Gear Shot Peening—Mean-Stress Shift & Crack Closure10
  3. Stress-Corrosion Cracking (SCC Film Rupture) & Corrosion Fatigue (Erasing \(\sigma_e\))11
  4. Hydrogen Embrittlement (HEDE / HELP / Hydrides) & Case 13.5 Bolt Delayed Fracture12
  5. Unified Environmental-Cracking Matrix, Three Defense Pillars & Aging Management13
§ 13.6 · MACRO / GRAIN / DISLOCATION RESIDUAL STRESSES (FIG. 13.20), PWHT & XRD GAUGING

Mismatched Thermal Contraction, Phase Expansion or Plastic Flow Locks In Self-Equilibrating Stress

Three Spatial Scales of Residual Stress (Fig. 13.20)

  • Type I (Macrostress, component scale, \(10\text{–}10^2\text{ MPa}\)): Self-equilibrating net force & moment across the section (quenched plate surface compression / core tension; weld-zone tension), directly governing distortion and cracking.
  • Type II (Intergranular microstress, grain scale): Balanced among neighboring grains—e.g., a martensite lath expanding \(\sim 4\%\) is compressed by surrounding austenite/ferrite.
  • Type III (Sub-microstress, atomic/dislocation scale, \(\sim\text{GPa}\)): Long-range \(1/r\) dislocation strain fields (linking back to Ch. 12).

Three Engineering Arenas & XRD Lattice Strain Gauge

  • Thermal vs. Transformation Quench Stress: Pure thermal cooling leaves surface compression / core tension, whereas martensitic expansion flips the sign. Through-hardened small parts risk surface tension cracking (relieved by tempering); case-hardened / carburized parts lock in fatigue-resistant surface compression.
  • Weld Residual Tension: Constrained weld shrinkage locks in tensile stress near \(\sigma_{\mathrm{ys}}\), driving cold cracking and SCC—relieved via post-weld heat treatment (PWHT).
  • Non-Destructive XRD (Ch. 5 Link): Elastic lattice-spacing shifts \(\Delta d_{hkl}\) shift Bragg peaks \(\Delta(2\theta)\) to invert surface stress.
§ 13.6 · Type I–III Residual Stresses & XRD Measurement
§ 13.6 CASE · 300M ULTRA-HIGH-STRENGTH STEEL (\(1930\text{ MPa}\)) LANDING-GEAR SHOT PEENING

\(-1000\text{ MPa}\) Compressive Shield Lowers Goodman Mean Stress and Halves \(\Delta K_{\mathrm{eff}}\) via Closure

\(\begin{gathered}K_{\mathrm{I}}(t)=Y\big[\sigma(t)+\sigma_r\big]\sqrt{\pi a}\;\;(\sigma_r\approx -1000\text{ MPa},\;a\lt\delta_{\mathrm{comp}})\\ \Delta K_{\mathrm{eff}}=\max(0,K_{\max})-\max(0,K_{\min})\ll Y\Delta\sigma\sqrt{\pi a}\\ \Delta K_{\mathrm{eff}}\downarrow\frac{1}{2}\xrightarrow{m=2\text{–}4}\frac{\mathrm{d}a}{\mathrm{d}N}\propto(\Delta K_{\mathrm{eff}})^m\downarrow\frac{1}{4}\text{ to }\frac{1}{16}\end{gathered}\)
  • Answering Q2 (Dual Fracture-Mechanics Shield): High-speed shot stretches a \(0.1\text{–}0.5\text{ mm}\) skin plastically; elastic constraint from the core locks in \(0.5\text{–}0.6\sigma_{\mathrm{ys}}\) residual compression—① Suppress Initiation: leaves \(\sigma_a\) intact while slashing surface \(\sigma_m\), lifting Goodman life \(5\text{–}10\times\); ② Arrest Growth: crack faces press shut whenever \(K_{\mathrm{I}}\le 0\); if \(\delta_{\mathrm{comp}}\gt a\) drives \(K_{\max}\le 0\), microcracks arrest completely.
§ 13.6 Case · Shot Peening & Crack Closure
§ 13.7.1, § 13.7.3 · SLIP–DISSOLUTION FILM RUPTURE (SCC) & CORROSION FATIGUE (CF)

Harmless Alone, Lethal Together: Slip Ruptures Passive Films for Stepwise Branched Cracking

SCC Triad & Slip–Dissolution Cycle (Fig. 13.21)

  • Three Signatures: ① Specific alloy–environment pairing (austenitic stainless + \(\mathrm{Cl^-}\), brass + ammonia “season cracking”); ② Sustained tensile stress (weld residual tension alone suffices. Never under pure compression); ③ Unrusted exterior yet branched brittle cracks (intergranular or transgranular).
  • Four-Step Film-Rupture Loop: Intact \(\mathrm{Cr_2O_3}\) passive film \(\to\) crack-tip slip step ruptures film to expose bare metal \(\to\) rapid localized anodic dissolution advances \(\Delta a\) (passivated walls stay narrow) \(\to\) repassivation resets the cycle.

Corrosion Fatigue (CF) & 3D-Printed Metal Vulnerability

  • Three Shifts vs. Inert Fatigue: ① Completely erases the endurance limit \(\sigma_e\) (S–N slopes downward indefinitely—mandatory finite-life design); ② No specific pairing needed (any metal in any electrolyte); ③ Multi-site initiation, corroded striations, and Paris rates far above air.
  • Additively Manufactured Alloys: Rapid solidification locks in high residual tension + as-built powder roughness + lack-of-fusion pores—extreme CF/SCC sensitivity cured by HIP + stress-relief anneal + machining/peening.
§ 13.7.1, § 13.7.3 · SCC, CF & AM Post-Processing
§ 13.7.2 & CASE 13.5 · HEDE, HELP & HYDROSTATIC-STRESS HYDROGEN ENRICHMENT IN BOLTS

Diffusing \(10^{12}\times\) Faster Than Carbon, \(\mathrm{H}\) Enriches as \(\exp(\sigma_h V_{\mathrm{H}}/RT)\) at Thread Roots to Snap Bolts

\(\begin{gathered}\mu_{\mathrm{H}}=\mu_{\mathrm{H}}^0+RT\ln c_{\mathrm{H}}-\sigma_h V_{\mathrm{H}}=\text{const}\implies\frac{c_{\mathrm{H}}^{\mathrm{root}}}{c_0}=\exp\!\left(\frac{\sigma_h V_{\mathrm{H}}}{RT}\right)\\ D_{\mathrm{H}}^{\alpha\text{-Fe}}\approx 7\times 10^{-9}\text{ m}^2/\text{s}\xrightarrow{\text{traps}}D_{\mathrm{eff}}\sim 10^{-11}\text{–}10^{-10}\implies t\sim\frac{x^2}{D_{\mathrm{eff}}}\sim\text{hours–days}\end{gathered}\)
  • Three Atomic Mechanisms (Fig. 13.22): ① HEDE (decohesion): \(\mathrm{H}\) weakens cohesive bonds across grain boundaries / cleavage planes; ② HELP (localized plasticity): \(\mathrm{H}\) atmospheres shield dislocation stress fields, focusing intense shear bands; ③ Brittle hydride precipitation (\(\mathrm{TiH_2}\) in \(\mathrm{Ti,Zr}\)).
  • Answering Q3 (4340 / 300M Bolt Forensics): Electroplating charges \(\mathrm{H}\) \(\to\) torquing creates \(\sigma_h\sim 1.5\text{–}2\text{ GPa}\) at thread roots, enriching \(\mathrm{H}\) \(3\text{–}5\times\) over \(1\text{ mm}\) pitch in hours \(\to\) intergranular “rock-candy” fracture. Cure: immediate post-plate bake-out (\(\sim 200\,^\circ\mathrm{C}\)).
Root Hydrostatic Tension \(\sigma_h\): 1.8 GPa
§ 13.7.2 & Bolt Case · HEDE/HELP & Delayed Fracture
§ 13.7 SYNTHESIS · SCC / HE / CF COMPARISON, THREE DEFENSE PILLARS & AGING MANAGEMENT

Stress and Environment Multiply at the Crack Tip: Decouple Alloy, Tame Stress, Isolate Media

Failure ModeLoading ConditionEnvironmental RequirementCore Atomic MechanismHigh-Risk Engineering Systems
Stress Corrosion (SCC)Sustained tension (incl. weld \(\sigma_r\))Specific alloy–electrolyte pairSlip-step film rupture + localized anodic dissolution304 stainless + \(\mathrm{Cl^-}\); brass + \(\mathrm{NH_3}\)
Hydrogen EmbrittlementStatic tension or slow strain rateAny \(\mathrm{H}\) source (incl. dry \(\mathrm{H_2}\) gas)\(\sigma_h\)-driven \(\mathrm{H}\) enrichment + HEDE / HELP / hydridePlated 300M bolts; 22MnB5 hot-stamped steel
Corrosion Fatigue (CF)Cyclic stress (no \(\sigma_e\) limit!)No specific pair (any electrolyte)PSB intrusion dissolution + anodic / \(\mathrm{H}\) synergyOffshore rigs, sea bridges, salted wet rails
Three Unified Defense Pillars & Cross-Industry Aging Management: ① Alloy Selection & Traps (duplex stainless over sensitized 304; \(\mathrm{Nb/Ti/V}\) nano-carbides as deep irreversible \(\mathrm{H}\) traps in 22MnB5 steel); ② Stress Control (PWHT stress relief, shot-peening compression); ③ Environmental Isolation (coatings, inhibitors, controlled cathodic potential avoiding \(\mathrm{H_2}\) overprotection). Nuclear RPVs (surveillance capsules tracking irradiation DBTT), aging airframes (SSID inspecting bondline MSD), and pipelines share one philosophy: track degradation kinetics \(\to\) dynamically update \(a_c\) and inspection intervals.
§ 13.7 · Defense & Aging Management
03
PART 03 · § 13.8, CHAPTER SUMMARY & BOOK EPILOGUE

Functional Failure Inversion & Grand 13-Chapter Synthesis

Returning to the Li-ion battery and silicon chip where Chapter 1 began, we close all thirteen chapters in one symphony of Order, Defects, and Evolution.
  1. Inverting the Materials Tetrahedron: Li-Ion Critical Particle Size \(L_c\) & BGA Solder Creep–Fatigue15
  2. Grand Synthesis of Chapters 1–13: Static Symmetry + “Generalized Force \(\times\) Mobility \(=\) Flux”16
  3. Book Epilogue — The Symphony of Order, Defects, and Evolution: Skeleton · Joints · Life17
§ 13.8 · FULL CIRCLE TO CH. 1 · INVERTING “PERFORMANCE → PROPERTIES → STRUCTURE → PROCESSING”

Downsize Li-Ion Single Crystals Below \(L_c\); Underfill BGA Solder Bumps Against Creep–Fatigue

\(\begin{gathered}\text{Li-ion particle: }K_{\max}\approx Y\sigma\sqrt{\pi L}\lt K_{\mathrm{IC}}\implies L_c\approx\frac{1}{\pi}\!\left(\frac{K_{\mathrm{IC}}}{Y\sigma}\right)^2\\ \text{Chip–substrate CTE mismatch: }\Delta\alpha\,\Delta T\approx 1.4\times 10^{-5}\times 80\approx 1.1\times 10^{-3}\;\text{(creep–LCF)}\end{gathered}\)
  • Li-Ion Capacity-Fade Inversion: Capacity cliff (performance) \(\leftarrow\) particle cracking exposes fresh surfaces to parasitic SEI growth (properties) \(\leftarrow\) lithiation breathing (\(\sim 10\%\) in graphite, \(\sim 2\%\) in \(\mathrm{LiCoO_2}\)) creates concentration/phase-mismatch tension (structure) \(\to\) Processing Cure: downsize \(L\lt L_c\) (with \(\Delta K_{\mathrm{th}}\) margin) + single-crystal cathode + surface coating.
  • Microchip Solder-Joint Inversion: \(80\,^\circ\mathrm{C}\) on/off swings impose Manson–Coffin plastic shear LCF while room-\(T\) \(\mathrm{Sn}\) solder sits at \(0.6T_{\mathrm{m}}\) (creep–fatigue) \(\to\) Processing Cure: epoxy underfill sharing shear.
§ 13.8 · Functional Materials Failure Diagnostics
GRAND SYNTHESIS · STATIC ORDER (CH. 1–5) & DYNAMIC EVOLUTION (CH. 6–13) IN ONE MASTER TABLE

Symmetry Builds Static Order, Free Energy Sets Direction, and Defects Open Kinetic Pathways

Book ArcCore QuestionGoverning Law / Force \(\times\) Mobility \(=\) FluxConvergence in Ch. 13 Fracture & Failure
Ch. 1–2 · Bonding & BandsWhat binds atoms?Pair well \(E(r)\) sets modulus \(E\), CTE \(\alpha\) & bands\(E,\gamma\) set ideal \(\sigma_{\mathrm{th}}\approx\sqrt{E\gamma/a_0}\); HEDE bond weakening
Ch. 3–5 · Crystals & XRDHow are atoms arranged & probed?14 Bravais lattices · 230 space groups · \(\Delta\boldsymbol{k}=\boldsymbol{g}\)bcc \(\{001\}\) cleavage choice; XRD \(d_{hkl}\) residual stress
Ch. 6–7 · Thermo & DiffusionWhere & how fast do atoms move?\(\Delta G\lt 0\) · \(-\nabla\mu\times(Dc/RT)=\boldsymbol{J}\) · vacanciesPower-law creep \(Q_c\approx Q_{\mathrm{self}}\); \(\sigma_h\)-driven \(\mathrm{H}\) enrichment
Ch. 8–9 · Phase & InterfacesWhat fixes phase & interfacial equilibria?Common tangent · \(\gamma=(\partial G/\partial A)\) · Gibbs adsorptionGriffith \(2\gamma\); \(\mathrm{P,Sb}\) GB segregation lowers \(2\gamma_s-\gamma_{\mathrm{gb}}\)
Ch. 10–11 · Solidification & PhaseHow does microstructure emerge?\(\Delta G^*\) barrier · spinodal / martensite · TTT/CCTSX blade grain selector; martensite \(\sigma_r\); dimple microvoids
Ch. 12–13 · Dislocations & FailureHow do solids flow and end?\(\tau_R=m\sigma\) · kink-pair · Paris \(C(\Delta K)^m\) · creep \(\dot{\varepsilon}_s\)Plastic work \(\gamma_p\gg 2\gamma\) creates toughness; shielding sets DBTT
Two Lifelong Guiding Principles: ① “Phase transformation is symmetry breaking” (unifying solidification, ordering, Landau ferroic transitions, and martensitic shear); ② “Generalized Force \(\times\) Mobility \(=\) Generalized Flux” (evolution \(=\) thermodynamic driving force \(\times\) defect carrier pathway \(\times\) thermally activated rate—governing diffusion, grain growth, creep, and crack advance).
Chapter 13 Conclusion · 13-Chapter Cross-Scale Synthesis
BOOK EPILOGUE · TO FELLOW TRAVELERS AT THE CLOSE OF THIRTEEN CHAPTERS

Seeing Both Order and the Virtue of Defects; Knowing Stillness and the Momentum of Evolution

“At heart, materials science is an art of translation: translating atomic arrangements into macroscopic properties, diffraction spots into symmetry, and cooling curves into microstructural evolution—turning the material world into a text we can read, decode, and command.”

01 · Order (The Skeleton)

At \(T=0\), symmetry inscribes 14 Bravais lattices and 230 space groups—every atom poised in exact register, giving matter its load-bearing geometric skeleton.

02 · Defects (The Joints)

At \(T\gt 0\), entropy enters through \(G=H-TS\) to part perfection: vacancies let atoms migrate, dislocations let metals forge, and grain boundaries toughen alloys—perfection fulfilled through imperfection.

03 · Evolution (Life)

Stress, heat, fields, and time work through defects to drive microstructure—balancing peak performance against fracture so grains of sand become microchips and raw ore becomes single-crystal turbine blades.

Book Epilogue · The Symphony of Order, Defects, and Evolution
IN-CLASS QUIZ

Three Quick Questions: Click an Option or Launch a Live QR Poll

1. A superalloy ruptures after \(1000\text{ h}\) at \(750\,^\circ\mathrm{C}\;(1023\text{ K})\) (\(C=20\)). At the same stress, what is its predicted life at \(815\,^\circ\mathrm{C}\;(1088\text{ K})\)? And why are turbine blades cast as single crystals?

From \(P_{\mathrm{LM}}=1023\times 23=23529\), \(\log t_r=23529/1088-20\approx 1.626\implies t_r\approx 42\text{ h}\); SX blades eliminate GB sliding and cavitation.

2. Shot peening introduces \(\approx -1000\text{ MPa}\) surface residual stress on a 300M landing gear, extending fatigue life \(5\text{–}10\times\). What is the fracture-mechanics mechanism?

Surface compression lowers Goodman \(\sigma_m\) against initiation and halves \(\Delta K_{\mathrm{eff}}\) via crack closure, cutting \(\mathrm{d}a/\mathrm{d}N\propto(\Delta K_{\mathrm{eff}})^m\).

3. Comparing stress-corrosion cracking (SCC), hydrogen embrittlement (HE), and corrosion fatigue (CF), which statement is completely accurate?

Dry \(\mathrm{H_2}\) gas also causes HE and higher strength worsens sensitivity (requiring bake-out); SCC is pair-specific, whereas CF is non-specific and erases \(\sigma_e\).

Fracture & Failure of Materials III · Grand Finale
FUNDAMENTALS OF MATERIALS SCIENCE · ALL 13 CHAPTERS · 36 LECTURES COMPLETE

Congratulations & Bon Voyage

Embedded 2D Model: Creep Curves & Larson–Miller Life (M12·05) · Complete Course: 36 Lectures · 695 Slides · 141 Embedded Models — mse3d.com