FUNDAMENTALS OF MATERIALS SCIENCE · CHAPTER 8

Phase Equilibria & Phase Diagrams II

Eutectic, Eutectoid, Monotectic, Peritectic, Peritectoid & Intermetallic Compounds
TEXTBOOK § 8.6 – § 8.8 · INVARIANT REACTIONS & COMPOUNDS · PART 2
“Different phase-diagram types are not unrelated ‘species,’ but geometric outcomes of the exact same free-energy model under different interaction parameters.”Fundamentals of Materials Science · Ch. 8 From Atomic Bond Energies to Three-Phase Common Tangents
Liang Wumse3d.com · Smart Classroom
Three G–x curves sharing one common tangent (f* = 0): central L gives a V-type eutectic split; outer L gives an inverted-V peritectic synthesis
ClickWheel→ NextP PenL LaserO OverviewF FullB Blank
OPENING · FROM TWO CURVES TO THREE: THREE-PHASE ISOTHERMS & MICROSTRUCTURAL DIVERSITY

How Does One Three-Phase Common Tangent Yield Both Ideal Solders and Incomplete Peritectic Rims?

QUESTION 01 · WHY DO SOLDERS CLUSTER AT 61.9 wt% Sn?

Why did decades of classic \(\mathrm{Sn\text{–}37Pb}\) electronics solder and modern lead-free \(\mathrm{SAC305}\) both converge right near a eutectic composition? What three decisive advantages does it hold over off-eutectic alloys?

QUESTION 02 · 73% OR 50%? TWO LEVER-RULE BOOKS

When a hypoeutectic \(\mathrm{Pb\text{–}40\text{ wt\% }Sn}\) alloy cools just below \(183\,^\circ\mathrm{C}\), equilibrium phase accounting gives \(73\%\) \(\alpha\) phase—so why do large primary \(\alpha\) grains occupy only \(50\%\) of the optical micrograph?

QUESTION 03 · SMOOTH EUTECTICS VS. INCOMPLETE PERITECTICS & PERITECTOIDS

All three are \(f^*=0\) invariant three-phase reactions—so why does eutectic \(L\to\alpha+\beta\) finish cooperatively at tiny undercooling, whereas peritectic \(L+\alpha\to\beta\) and peritectoid \(\alpha+\beta\to\gamma\) almost always stall incomplete under conventional cooling?

Textbook § 8.6–8.8 · Five Invariant Reactions, Law of Adjoining Phase Regions & Intermetallic Compounds
CHAPTER 8 PART 2 · FIVE-STOP ROADMAP

Track the Order of Three Common-Tangent Points to Decode Every Complex Binary Diagram

  1. Eutectic & SoldersThree-curve tangent \(f^*=0\)
    Phases vs. microconstituents
    Textbook § 8.6.1–2
  2. Coupled Growth & Mod.Lateral diffusion \(\lambda\propto v^{-1/2}\)
    \(\mathrm{Al\text{–}Si}\) \(\mathrm{Na/Sr}\) twin modification
    Textbook § 8.6.3
  3. Eutectoid & MonotecticAll-solid ultrafine lamellae
    Liquid-gap bearing alloys
    Textbook § 8.6.4–5
  4. Peritectic & PeritectoidInverted-V synthesis & depletion
    \(\beta\)-rim \(\sqrt{D_\beta t}\) diffusion bottleneck
    Textbook § 8.7
  5. Reading Rule & Cpds.Seven invariants & \(\Delta P=\pm 1\) law
    Congruent vs. incongruent melting
    Textbook § 8.8
Mastering these reading rules unlocks Fe–C steels and Cu/Al/Ti engineering alloys in Part 3
01
PART ONE

Eutectic, Eutectoid & Monotectic: V-Type Split

When a high-temperature single-phase field descends from above as a V-shaped wedge onto the middle point of a three-phase isotherm, cooling decomposes one parent phase isothermally into two flanking phases.
  1. Three collinear \(G\text{–}x\) tangents & interactive eutectic construction05
  2. \(\mathrm{Pb\text{–}Sn}\) cooling paths, phase vs. constituent fractions & solders06
  3. Coupled lateral diffusion \(\lambda\propto v^{-1/2}\) & \(\mathrm{Al\text{–}Si}\) \(\mathrm{Na/Sr}\) modification07
  4. Eutectoid reaction \(\gamma\to\alpha+\beta\): solid-state ultrafine lamellae08
  5. Monotectic reaction \(L_1\to\alpha+L_2\): liquid miscibility gap & bearings09
§ 8.6.1 · THERMODYNAMIC CONSTRUCTION: THREE G–x CURVES TANGENT TO ONE LINE

Four Chemical-Potential Equalities Fix Three Tangent Points and \(T_{\mathrm{E}}\): Collinear Tangency, Not Equal Minima

\(\begin{gathered}\mu_{\mathrm{A}}^L=\mu_{\mathrm{A}}^\alpha=\mu_{\mathrm{A}}^\beta,\quad\mu_{\mathrm{B}}^L=\mu_{\mathrm{B}}^\alpha=\mu_{\mathrm{B}}^\beta\\ L\xrightarrow{T_{\mathrm{E}}}\alpha+\beta\;\;(f^*=2-3+1=0)\end{gathered}\)
  • Why Is \(T_{\mathrm{E}}\) Strictly Invariant? Four independent chemical-potential equalities uniquely lock all four unknowns—three tangent compositions \((x_{\mathrm{E}}^\alpha,x_{\mathrm{E}}^L,x_{\mathrm{E}}^\beta)\) plus \(T_{\mathrm{E}}\). Below \(T_{\mathrm{E}}\), \(G^L\) rises above the \(\alpha\text{–}\beta\) common tangent and liquid disappears.
  • Unifying Eutectic, Peritectic & Isomorphous: Sweep reduced temperature \(t\) on the right to project lower-convex-hull tangents onto \(T\text{–}x\), and switch presets to Peritectic or Isomorphous.
Textbook § 8.6.1 · Three-Curve Common-Tangent Eutectic Construction (Eq. 8.16, Fig. 8.8)
§ 8.6.2 · Pb–Sn EUTECTIC DIAGRAM, FOUR COOLING PATHS & PHASE VS. MICROCONSTITUENT FRACTIONS

Span Isotherm Ends for Phases; Span Solvus Endpoint to Eutectic Point for Microconstituents

\(\begin{gathered}\mathrm{Pb\text{–}40\%Sn}\;(182\,^\circ\mathrm{C}):\;f_{\text{tot}}^\alpha=\frac{97.8-40}{97.8-18.3}\approx 73\%\\ f^{\alpha_{\text{prim}}}=\frac{61.9-40}{61.9-18.3}\approx 50\%,\;\;f^{\text{eut}}\approx 50\%\end{gathered}\)
  • Answering Q2 (Reconciling Both Ledgers): Out of \(73\%\) total \(\alpha\) phase, \(50\%\) solidified early as coarse primary \(\alpha\) dendrites while \(23\%\) resides as fine lamellae inside eutectic colonies—mechanical strength tracks microconstituents.
  • Answering Q1 (Why Eutectic Solders Win): \(\mathrm{Sn\text{–}37Pb}\) (\(183\,^\circ\mathrm{C}\)) minimizes thermal damage via lowest \(T_{\mathrm{m}}\), flows cleanly with zero mushy zone, and forms \(100\%\) fine lamellar eutectic without coarse primary crystals (as does lead-free \(\mathrm{SAC305}\) at \(\sim 217\text{–}220\,^\circ\mathrm{C}\)).
Textbook § 8.6.2 · Figs. 8.9–8.10 Pb–Sn Cooling Paths, Primary/Eutectic Constituents & Lead-Free SAC305
§ 8.6.3 & EXTENDED READING · COUPLED EUTECTIC GROWTH, JACKSON FACTOR & Al–Si MODIFICATION

Mutual Solute Sinks Shrink Diffusion to \(\lambda/2\); Trace \(\mathrm{Na/Sr}\) Twinning Turns Brittle \(\mathrm{Si}\) Needles into Ductile Fibers

\(\begin{gathered}\text{Lateral path }\frac{\lambda}{2}\ll\frac{D_L}{v},\quad\text{diffusion vs. }\gamma_{\alpha\beta}\implies\lambda\propto v^{-1/2}\\ \text{Regular }(\alpha_{\mathrm{J}}\lt 2):\;f_\beta\lt 30\%\text{ rods},\;\;f_\beta\gt 30\%\text{ lamellae}\end{gathered}\)
  • Rough vs. Faceted Criterion: Metal–metal systems (\(\mathrm{Pb\text{–}Sn},\mathrm{Al\text{–}Cu}\), Jackson factor \(\alpha_{\mathrm{J}}\lt 2\)) grow continuously at rough interfaces into regular rods/lamellae; metal–nonmetal systems (\(\mathrm{Si}\) in \(\mathrm{Al\text{–}Si}\), graphite in \(\mathrm{Fe\text{–}C}\), \(\alpha_{\mathrm{J}}\gt 2\)) form jagged irregular eutectics.
  • Silumin (\(\mathrm{Al\text{–}12.6\%Si}\)) Dual Treatments: ① Modification: trace \(\mathrm{Na/Sr}\) poisons \(141^\circ\) re-entrant twin grooves on \(\mathrm{Si}\) and induces high-density twinning, bending coarse plates into fine fibers and multiplying ductility. ② Inoculation: trace \(\mathrm{P}\) in hypereutectic melts forms \(\mathrm{AlP}\) nuclei to refine blocky primary \(\mathrm{Si}\).
Fig. 8.11: Coupled Lateral Diffusion (Left) vs. Al–Si Twin Modification (Right) (a) Coupled Growth (λ ∝ v⁻¹/²) α β α β Liquid L (growth rate v ↑) α rejects B → lateral sink to β (λ/2) Faster cooling v → finer spacing λ (b) Al–Si Modification (Na / Sr) Unmodified: coarse Si needles (δ < 3%) +Sr/Na: twinned fibers, high ductility
Textbook § 8.6.3 & Extended Reading · Coupled Lateral Diffusion, Regular/Irregular Criteria & Al–Si Modification (Fig. 8.11)
§ 8.6.4 · EUTECTOID REACTION: ALL-SOLID V-TYPE DECOMPOSITION

\(\gamma\to\alpha+\beta\) Shares Eutectic Geometry, Yet Solid-State \(D_{\mathrm{s}}\ll D_L\) Forces Ultrafine Lamellae

\(\begin{gathered}\gamma\xrightarrow{T_{\text{eutectoid}}}\alpha+\beta\;\;(\text{parent }\gamma\text{ drops as a V onto eutectoid pt.})\\ \text{Fig. 8.12 }(700\,^\circ\mathrm{C}):\;\gamma_{45\%}\to 0.6\,\alpha_{15\%}+0.4\,\beta_{90\%}\end{gathered}\)
  • Why Is Pearlite Far Finer Than Ledeburite? Because the parent phase is solid \(\gamma\), solid-state diffusivity \(D_{\mathrm{s}}\) is orders of magnitude below \(D_L\); solute can redistribute laterally only across submicron distances, yielding much finer interlamellar spacing.
  • Three Industrial Eutectoid Benchmarks: ① Steel heat-treatment baseline \(\mathrm{Fe\text{–}C}\) at \(727\,^\circ\mathrm{C}\) (\(\gamma\to\alpha+\mathrm{Fe_3C}\) pearlite); ② \(\mathrm{Cu\text{–}Zn}\) brass at \(558\,^\circ\mathrm{C}\) (\(\delta\to\gamma+\varepsilon\)); ③ Aerospace \(\mathrm{Ti\text{–}Al}\) at \(1120\,^\circ\mathrm{C}\) (\(\alpha\to\alpha_2+\gamma\)).
Hypoeutectoid Path (Fig. 8.12, \(30\%\text{ B}\))Proeutectoid \(\alpha\) precipitates first in \(\alpha+\gamma\); just above \(700\,^\circ\mathrm{C}\), proeutectoid \(\alpha\) is \((45-30)/(45-15)=50\%\), while the remaining \(50\%\) \(\gamma_{45\%}\) decomposes isothermally into eutectoid lamellae. After completion, total \(\alpha\) reaches \((90-30)/(90-15)=80\%\) (\(30\%\) from eutectoid).
Hypereutectoid Path (Fig. 8.12, \(60\%\text{ B}\))Proeutectoid \(\beta\) precipitates first in \(\gamma+\beta\); at \(700\,^\circ\mathrm{C}\), proeutectoid \(\beta\) is \((60-45)/(90-45)=1/3\), while the remaining \(2/3\) \(\gamma_{45\%}\) transforms into eutectoid colonies. After completion, total \(\beta\) is \((60-15)/(90-15)=60\%\).
Textbook § 8.6.4 · Eutectoid Reaction, Hypo-/Hypereutectoid Lever Accounting & Fine Spacing Origin (Eq. 8.17, Fig. 8.12)
§ 8.6.5 · MONOTECTIC REACTION & SELF-LUBRICATING BEARING ALLOYS

A Liquid Miscibility Dome Intersects the Liquidus: One Liquid Splits into Solid and Second Liquid \(L_1\to\alpha+L_2\)

\(\begin{gathered}L_1\xrightarrow{T_{\mathrm{mono}}}\alpha+L_2\;\;(\text{V-type decomposition})\\ \mathrm{Cu\text{–}Pb}\;(955\,^\circ\mathrm{C}):\;L_1(36\%)\to\alpha(\mathrm{Cu})+L_2(87\%)\end{gathered}\)
  • \(\mathrm{Cu\text{–}Pb}\) Self-Lubricating Bearings: Monotectic solidification disperses soft, low-melting \(\mathrm{Pb}\)-rich droplets throughout a hard, thermally conductive \(\mathrm{Cu}\) matrix—an ideal hard/soft composite for crankshaft journal bearings.
  • Suppressing Gravity Settling: Because immiscible liquids (\(\mathrm{Cu\text{–}Pb},\mathrm{Al\text{–}Pb},\mathrm{Al\text{–}Bi}\)) differ sharply in density, slow casting causes droplet settling; gas atomization or melt spinning freezes uniform dispersions.
Textbook § 8.6.5 · Monotectic Reaction, Cu–Pb Liquid Immiscibility & Bearing Alloys (Eq. 8.18, Fig. 8.13)
02
PART TWO

Peritectic & Peritectoid: Inverted-V & Rims

When the product tangent point falls between the two reactant points, the single-phase field rises from below as an inverted V—wrapping interfaces in a solid rim that chokes transport to a parabolic crawl.
  1. Peritectic reaction \(L+\alpha\to\beta\): tangent order, reactant depletion & model11
  2. Peritectic kinetics: \(\beta\) rim enveloping & \(h\propto\sqrt{D_\beta t}\) peritectic segregation12
  3. Peritectoid reaction \(\alpha+\beta\to\gamma\): all-solid rim & \(\mathrm{Fe\text{–}Zn}\) coatings13
§ 8.7.1 · PERITECTIC REACTION: INVERTED-V SYNTHESIS & THREE DEPLETION OUTCOMES

Liquid Shifts Outside While Product Lies Between: Outcomes Depend on Whether \(L\) or Solid Runs Out First

\(\begin{gathered}L+\alpha\xrightarrow{T_{\mathrm{P}}}\beta\;\;(x_{\mathrm{P}}^\alpha\lt x_{\mathrm{P}}^\beta\lt x_{\mathrm{P}}^L)\\ \text{Fig. 8.14 }(1000\,^\circ\mathrm{C}):\;\tfrac{2}{3}\alpha_{10\%}+\tfrac{1}{3}L_{70\%}\to\beta_{30\%}\end{gathered}\)
  • Where Peritectics Arise: Typical when component melting points differ sharply (e.g., \(\mathrm{Fe\text{–}C}\) \(L_{0.53}+\delta_{0.09}\to\gamma_{0.17}\) at \(1495\,^\circ\mathrm{C}\), \(\mathrm{Cu\text{–}Zn}\), \(\mathrm{Ag\text{–}Pt}\)).
  • Three Depletion Ledgers (Fig. 8.14): ① Hypoperitectic (\(20\%\)): \(L\) (\(1/6\)) runs out first \(\to\alpha+\beta\); ② Peritectic (\(30\%\)): \(L:\alpha=1:2\) exhaust together \(\to 100\%\;\beta\); ③ Hyperperitectic (\(50\%\)): \(\alpha\) runs out first \(\to L+\beta\) continues freezing.
Textbook § 8.7.1 · Eutectic vs. Peritectic Tangent Order & Hypo-/Hyperperitectic Lever Accounting (Eq. 8.19, Fig. 8.14)
§ 8.7.2 · PERITECTIC KINETIC BOTTLENECK: WHY CONVENTIONAL CASTING LEAVES UNREACTED CORES

A Continuous \(\beta\) Rim Walls Off \(\alpha\) from Liquid: Through-Rim Solid Diffusion Self-Brakes as \(h\propto\sqrt{D_\beta t}\)

\(\begin{gathered}J_{\mathrm{B}}\propto D_\beta\frac{\Delta c}{h},\quad\frac{\mathrm{d}h}{\mathrm{d}t}\propto J_{\mathrm{B}}\implies h^2\propto D_\beta\Delta c\,t\\ h(t)\propto\sqrt{D_\beta t}\;\;(\text{thicker rim}\implies\text{flatter slope & choked flux})\end{gathered}\)
  • Answering Q3 (Meeting Ch. 7 Reactive Diffusion): Product \(\beta\) nucleates rapidly along the \(\alpha/L\) interface to form a continuous shell; thereafter \(\mathrm{B}\) atoms must diffuse slowly across solid \(\beta\), stalling completion.
  • Peritectic vs. Dendritic Segregation: Isomorphous coring is a composition gradient within one phase, whereas peritectic enveloping traps a distinct unreacted \(\alpha\) phase core inside \(\beta\).
Peritectic hold time \(t / t_0\): h = 0.60 hₘ
Textbook § 8.7.2 · Fig. 8.15 Peritectic Rim Concentration Profile, Parabolic Self-Braking & Peritectic Segregation
§ 8.7.3 · PERITECTOID REACTION: ALL-SOLID SYNTHESIS & GALVANNEALED COATINGS

\(\alpha+\beta\to\gamma\) Lacks Even Direct Liquid Precipitation—Making Completion Still Slower Than Peritectics

\(\begin{gathered}\alpha+\beta\xrightarrow{T_{\text{peritectoid}}}\gamma\;\;(x^\alpha\lt x^\gamma\lt x^\beta)\\ \mathrm{Fe_3Zn_{10}}+\mathrm{FeZn_{10}}\xrightarrow{550\,^\circ\mathrm{C}}\mathrm{Fe_5Zn_{21}}\end{gathered}\)
  • Doubly Sluggish All-Solid Rim: Once \(\gamma\) nucleates as a thin barrier along \(\alpha/\beta\) grain boundaries, transport relies solely on solid-state diffusion; practical cooling routinely leaves non-equilibrium \(\alpha+\beta+\gamma\) coexistence.
  • Engineering Application: Automotive corrosion-resistant galvannealed steel sheets form an interfacial \(\Gamma_1\) (\(\mathrm{Fe_5Zn_{21}}\)) intermetallic layer via the \(550\,^\circ\mathrm{C}\) \(\mathrm{Fe\text{–}Zn}\) peritectoid reaction.
Textbook § 8.7.3 · Peritectoid Topology, Solid-State Diffusion Bottleneck & Galvannealed Fe–Zn Coatings (Eq. 8.20, Fig. 8.16)
03
PART THREE

Reading Rule, Adjoining Law & Compounds

Distill all seven three-phase invariants into one middle-point V vs. inverted-V rule, pair it with the ΔP = ±1 audit ruler, and master congruent vs. incongruent intermetallics.
  1. Seven three-phase invariant reactions & Law of Adjoining Phase Regions (\(\Delta P=\pm 1\))15
  2. One regular-solution model \((\Omega^s,\Omega^l)\) generates the entire phase-diagram zoo16
  3. Intermediate phases & intermetallics: congruent diagram-splitting vs. peritectic melting17
§ 8.8.1 · THREE-PHASE ISOTHERM READING RULE & LAW OF ADJOINING PHASE REGIONS

Watch the Middle Point: V-Down Means \(1\to 2\) Split; Inverted-V Up Means \(2\to 1\) Synthesis

TypeCooling RxnMiddle PtEngineering Benchmarks
Eutectic\(L\to\alpha+\beta\)V-down (split)\(\mathrm{Pb\text{–}Sn}\;183\,^\circ\mathrm{C}\), \(\mathrm{Fe\text{–}C}\;1148\,^\circ\mathrm{C}\)
Eutectoid\(\gamma\to\alpha+\beta\)V-down (split)\(\mathrm{Fe\text{–}C}\;727\,^\circ\mathrm{C}\), \(\mathrm{Ti\text{–}Al}\;1120\,^\circ\mathrm{C}\)
Monotectic\(L_1\to\alpha+L_2\)V-down (split)\(\mathrm{Cu\text{–}Pb}\;955\,^\circ\mathrm{C}\)
Peritectic\(L+\alpha\to\beta\)Inv-V (merge)\(\mathrm{Fe\text{–}C}\;1495\,^\circ\mathrm{C}\), \(\mathrm{Cu\text{–}Zn}\;902\,^\circ\mathrm{C}\)
Peritectoid\(\alpha+\beta\to\gamma\)Inv-V (merge)\(\mathrm{Fe\text{–}Zn}\;550\,^\circ\mathrm{C}\) (+ metatectic/syntectic)
  • Law of Adjoining Phase Regions (Audit Ruler): Crossing any boundary changes phase count by \(\Delta P=\pm 1\). Crossing a eutectic line looks like \(L+\alpha\,(2)\to\alpha+\beta\,(2)\), yet passes through a zero-width 3-phase line \(2\to 3\to 2\)! (Table 8.1's 7 invariants also include V-down metatectic \(\delta\to L+\gamma\) and inv-V syntectic \(L_1+L_2\to\alpha\).)
Textbook § 8.8.1 · Table 8.1 Seven Three-Phase Invariants, Fig. 8.17 Local Topology & Law of Adjoining Phase Regions
§ 8.8.2 · ONE REGULAR-SOLUTION MODEL TUNING (Ω^s, Ω^l) GROWS THE ENTIRE PHASE-DIAGRAM ZOO

From Ch. 2 Bond Energies to Ch. 6 \(\Omega\) to Ch. 8 Phase Diagrams—Unifying Both Halves of the Book

Ch. 2 Bond Energies εij→Mean-Field Ω = zNA[εAB−…]→Ch. 6 ΔGmix Curve Family→Common-Tangent Projection→Ch. 8 Phase-Diagram Zoo
① \(\Omega^s = \Omega^l = 0\) (Ideal Solution) \(\to\) Lens Isomorphous DiagramZero excess repulsion or attraction in either solid or liquid (e.g., \(\mathrm{Cu\text{–}Ni}\)) yields a smooth lens-shaped liquidus–solidus loop.
② \(\Omega^s - \Omega^l \gg 0\) \(\to\) Minimum-Point Isomorphous to EutecticMid-composition solid is penalized relative to liquid, pulling down an azeotrope-like minimum; larger \(\Omega^s\) pushes the solid miscibility dome through the solidus into a eutectic diagram (\(\mathrm{Cu\text{–}Ag}\)).
③ Wide \(\Delta T_{\mathrm{m}}\) with \(\Omega^s > 0\) \(\to\) Peritectic DiagramWhen a solid miscibility gap meets a steeply tilted liquidus–solidus loop, the three-phase liquid tangent lands outside on the low-\(T_{\mathrm{m}}\) side to form a peritectic (\(\Omega^l - \Omega^s \gg 0\) gives a maximum-point lens).
④ Very Large \(\Omega^l > 2RT\) \(\to\) Monotectic DiagramStrong like-atom clustering in the melt splits the liquid itself above the liquidus, creating a liquid miscibility dome and a monotectic diagram (\(\mathrm{Cu\text{–}Pb}\)).
Textbook § 8.8.2 · Regular-Solution (Ω^s, Ω^l) Phase-Diagram Evolution & Cross-Chapter Thermodynamic Thread
§ 8.8.3 · INTERMEDIATE PHASES & INTERMETALLIC COMPOUNDS: CONGRUENT VS. INCONGRUENT MELTING

Congruently Melting Line Compounds Reach a Liquidus Peak, Splitting Complex Diagrams in Two

\(\begin{gathered}\text{Congruent: }\mathrm{AB(s)}\xrightarrow{T_{\mathrm{m}}}L_{\mathrm{AB}}\;\;(\text{acts as independent subsystem})\\ \text{Incongruent: }\mathrm{A_2B(s)}\xrightarrow{T_{\mathrm{P}}}\alpha+L_P\;\;(\text{peritectic synthesis on cooling})\end{gathered}\)
  • Why Are Stoichiometric Compounds Vertical Lines? Slight off-stoichiometry creates costly antisite/vacancy defects, making \(G(x)\) ultra-steep so neighboring common tangents pin to virtually one composition.
  • Divide-and-Conquer Rule: A congruently melting compound (\(\mathrm{AB}\) in Fig. 8.18a; \(\mathrm{Fe_3C}\) approx.) partitions \(\mathrm{A\text{–}B}\) into independent \(\mathrm{A\text{–}AB}\) and \(\mathrm{AB\text{–}B}\) subsystems; incongruent compounds (\(\mathrm{CuAl_2}\), \(\gamma\text{-TiAl}\)) end at a peritectic line and cannot split the diagram.
Textbook § 8.8.3 · Intermediate Phases, Line Compounds & Congruent vs. Incongruent Melting Criteria (Fig. 8.18)
LECTURE SUMMARY

Five Invariant Reactions, One Adjoining-Region Law & Two Compound Types Decode Binary Diagrams

3-Curve Tangent f*=0→V-Split: Eutectic·Eutectoid·Monotectic→Λ-Merge: Peritectic·Peritectoid→Adjoining Law ΔP=±1→Congruent / Incongruent Cpds
ANSWERING QUESTIONS 01 & 02

Eutectic alloys offer the lowest melting point, isothermal zero-mushy-zone fluidity, and \(100\%\) fine coupled lamellae—ideal for solders. In \(\mathrm{Pb\text{–}40\%Sn}\) at \(182\,^\circ\mathrm{C}\), spanning the full isotherm gives \(73\%\) total \(\alpha\) phase, whereas spanning \((18.3,61.9)\) gives \(50\%\) coarse primary \(\alpha\) microconstituent.

ANSWERING QUESTION 03

Eutectic \(\alpha\) and \(\beta\) grow side-by-side into liquid via short \(\lambda/2\) lateral liquid diffusion; peritectic and peritectoid products coat reactant interfaces with a solid rim, forcing sluggish through-rim solid diffusion (\(h\propto\sqrt{Dt}\)) that stalls under normal cooling.

Next in Finale Part 3: Phase Equilibria & Phase Diagrams III — the \(\mathrm{Fe\text{–}Fe_3C}\) system, \(\mathrm{Cu/Al/Ti}\) alloys, Gibbs ternary triangles, CALPHAD & Ellingham diagrams.

Phase Equilibria & Phase Diagrams II
CONCEPT QUIZ

Three Quick Questions: Click to Check or Launch a Live Class Poll

1. At \(183\,^\circ\mathrm{C}\) in \(\mathrm{Pb\text{–}Sn}\), \(\alpha(18.3\%)\), \(L_{\mathrm{E}}(61.9\%)\), and \(\beta(97.8\%)\) coexist. For \(\mathrm{Pb\text{–}40\%Sn}\) cooled to \(182\,^\circ\mathrm{C}\), what are the mass fractions of primary \(\alpha\) (microconstituent) and total \(\alpha\) phase?

Primary \(\alpha\) lever spans \((18.3,61.9)\): \((61.9-40)/(61.9-18.3)\approx 50\%\); total \(\alpha\) phase lever spans \((18.3,97.8)\): \((97.8-40)/(97.8-18.3)\approx 73\%\).

2. In the \(\mathrm{Fe\text{–}C}\) peritectic reaction \(L_{0.53}+\delta_{0.09}\to\gamma_{0.17}\) (\(1495\,^\circ\mathrm{C}\)), after a hypoperitectic steel with \(w_0=0.12\%\text{ C}\) completes equilibrium reaction, what phases remain and what is \(f^\gamma\)?

Since \(0.12\%\) lies between \(\delta(0.09\%)\) and \(\gamma(0.17\%)\), liquid runs out first into \(\delta+\gamma\); \(f^\gamma=(0.12-0.09)/(0.17-0.09)=3/8=37.5\%\).

3. Regarding three-phase isotherm reading rules, the Law of Adjoining Phase Regions, and intermetallic compounds, which statement is completely accurate?

V-down is decomposition (eutectic/eutectoid/monotectic), inverted-V is synthesis (peritectic/peritectoid); two single-phase fields must be separated by a two-phase field (\(\Delta P=\pm 1\)); only congruently melting compounds split diagrams.

Phase Equilibria & Phase Diagrams II
FUNDAMENTALS OF MATERIALS SCIENCE · CHAPTER 8

Thank You

6 Embedded Models: G–x to Phase Diagrams · Binary Eutectic · Monotectic · Peritectic · Peritectoid · Intermetallic Compounds — mse3d.com