“Phase diagrams mark only the thermodynamic destination; whether atoms diffuse long-range or shear cooperatively decides where a solid microstructure actually stops.”Fundamentals of Materials Science · Ch. 11 · In Tribute to E. C. Bain & T. Y. Hsu (Xu Zuyao)
Slow-cooling \(0.77\%\mathrm{C}\) austenite yields tough pearlitic lamellae, yet water quenching transforms it within \(10^{-7}\text{ s}\)—what interstitial site traps the carbon, and why does growth track cooling rather than isothermal holding?
How does face-centered cubic austenite reconstruct into body-centered tetragonal martensite with atomic shifts under \(0.1\text{ nm}\)? Why can one parent grain spawn up to \(24\) crystallographic variants with visible surface tilt relief?
Heating steel martensite irreversibly tempers it into ferrite plus cementite—how does equiatomic \(\mathrm{NiTi}\) martensite revert reversibly to its parent shape, and even deliver \(8\%\) superelasticity in self-expanding vascular stents?
Along the falling-temperature axis where diffusion freezes out and shear takes over: Massive Transformation & \(T_0\) Locus \(\to\) Pearlite \(\to\) Martensite Thermodynamics & Bain Crystallography \(\to\) Bainite, TRIP Steels & \(\mathrm{NiTi}\).
T = 560 °C
| Feature | Pearlite (Diffusional) | Massive (Cross-GB) | Bainite (Mixed) | Martensite (Displacive) |
|---|---|---|---|---|
| Composition | Changes (\(\mathrm{C}\) partitions) | Unchanged (\(x_\alpha = x_\gamma\)) | Partial (\(\mathrm{C}\) into \(\gamma\)) | Unchanged (substitutional) |
| Atomic Motion | Long-range lateral diff. | Incoherent short jumps | \(\mathrm{Fe}\) shear + short \(\mathrm{C}\) diff. | Cooperative lattice shear |
| Rate Control | \(\mathrm{C}\) / alloy diffusion | Interface mobility \(M_{\mathrm{int}}\) | Mixed (\(\mathrm{C}\)-diffusion limited) | Sonic elastic-wave speed |
| Interface Type | Incoherent | Incoherent | Semicoherent | Coherent / semicoherent |
| Surface Relief | None | None (patchy grains) | Yes (invariant-plane tilt) | Pronounced tilt relief |
| Growth Speed | \(\sim 1\;\mu\text{m/s}\) | \(\sim 10^4\;\mu\text{m/s}\;(1\text{ cm/s})\) | \(\sim 1\;\mu\text{m/s}\) | \(\approx 10^3\text{ m/s}\;(10^9\;\mu\text{m/s})\) |
T = 650 °C
0.80% C
Quenching traps carbon in \(c\)-axis octahedral sites alongside \(10^{15}\text{ m}^{-2}\) dislocations or twins (HRC 60–65, brittle) and advances athermally as cooling banks \(\Delta G^*_{\mathrm{req}}\); two fcc cells embed a \(c/a=\sqrt{2}\) bct Bain cell that compresses with \(\lt 0.1\text{ nm}\) atomic shifts, coupling with LIS + rotation into \(24\) variants and surface relief.
Plastic dislocation relaxation in steel dissipates elastic energy so heating only tempers \(\alpha'\) into \(\alpha+\mathrm{Fe_3C}\); ordered \(\mathrm{NiTi}\) stores transformation strain in coherent interfaces as an elastic “spring,” enabling reversible \(\gt A_f\) shape memory and \(8\%\) superelasticity.
Next lecture turns these mechanisms into engineering heat-treatment maps: Solid-State Phase Transformations III — TTT/CCT diagrams, Jominy hardenability, steel's four classic heat treatments, \(\mathrm{Al}\)-alloy aging windows & the glass transition.
1. Eutectoid steel (\(T_{\mathrm{E}}=727\,^\circ\mathrm{C}\)) forms pearlite with \(\lambda=0.70\;\mu\text{m}\) at \(700\,^\circ\mathrm{C}\); what is \(\lambda\) at \(600\,^\circ\mathrm{C}\)? And if a steel with \(M_s=300\,^\circ\mathrm{C}\) is quenched to \(200\,^\circ\mathrm{C}\) and held isothermally, what is its martensite fraction?
\(\lambda\propto 1/\Delta T\Rightarrow 0.70\times 27/127\approx 0.15\;\mu\text{m}\); \(f=1-\mathrm{e}^{-1.1}\approx 66.7\%\), and athermal martensite does not grow during isothermal holding.
2. Comparing massive transformation, bainite, martensite, and the \(\mathrm{Fe\text{–}C}\) \(T_0\) locus, which statement is completely accurate?
Partitionless \(\gamma\to\alpha\) requires \(T\lt T_0\); massive jumps are uncoordinated (zero relief); each \(0.1\%\mathrm{C}\) drops \(M_s\) by \(\sim 40\,^\circ\mathrm{C}\) and shifts laths to twinned plates.
3. Regarding automotive TRIP steels, Bain crystallography, and biomedical \(\mathrm{NiTi}\) alloys, which judgment is accurate?
Steel \(\alpha'\) relaxes plastically by dislocations and tempers on heating; \(\mathrm{NiTi}\) SE operates above \(A_f\); an invariant habit plane requires Bain strain + LIS + rotation.