“Crystals are like people: it is the defects in them which tend to make them interesting.”Sir Charles Frank · Pioneer of Dislocation Theory
Shearing an entire atomic plane rigidly predicts an ideal strength of \(G/10\text{–}G/30\) (\(\sim 1\text{ GPa}\)), yet high-purity \(\mathrm{Al}\) or \(\mathrm{Cu}\) single crystals yield at just \(0.5\text{–}1\text{ MPa}\) (\(10^{-5}\text{–}10^{-4}G\))—why?
A mixed dislocation curves into loops or tangles into 3D networks where an “extra half-plane” vanishes—how does a lattice circuit read its topological charge \(\boldsymbol{b}\), and why does the line pull taut like a bowstring?
Why do \(\mathrm{C}\) and \(\mathrm{N}\) solutes segregate beneath an edge dislocation while ignoring a pure screw—and what “Lorentz-like” formula gives the force exerted by stress tensor \(\boldsymbol{\sigma}\) on any dislocation?
Chapter 12 spans four parts; Part 1 builds the geometric and elastic foundations: strength gap & Volterra cut \(\to\) edge, screw, mixed dislocations & loops \(\to\) FS/RH Burgers circuit & Frank's \(Gb^2\) rule \(\to\) \(1/r\) stress fields & Peach–Koehler force.
x = 0.25 b
τ = 0.65 Gb/L
Rigid-plane slip breaks all bonds at once (\(\sim G/10\)), whereas a dislocation switches one core row at a time; the FS/RH closure failure \(\boldsymbol{b}=\oint\mathrm{d}\boldsymbol{u}\) is a conserved topological charge obeying \(\sum\boldsymbol{b}_i=\boldsymbol{0}\) at nodes, while self-energy \(E\approx\alpha Gb^2\) imparts bowstring line tension \(T\approx\tfrac{1}{2}Gb^2\).
Screw dislocations carry pure shear (\(\sigma_{\mathrm{m}}=0\)), whereas edge dislocations compress above and stretch below the slip plane to trap Cottrell solute atmospheres; \(\boldsymbol{F}/L=(\boldsymbol{\sigma}\cdot\boldsymbol{b})\times\boldsymbol{l}\) drives glide, climb, \(x=0\) tilt walls, and \(x=\pm y\) dipoles.
Next Lecture (Motion, Multiplication & Crystal-Structure Effects) — Dislocations, Plasticity & Recrystallization II: Peierls–Nabarro barrier, glide & climb, Frank–Read sources, Shockley partials & stacking faults, Thompson tetrahedron, and \(\mathrm{bcc/hcp}\) cores.
1. Regarding Frenkel ideal shear strength and the geometry of edge, screw, and loop dislocations, which statement is accurate?
Bulk crystals yield \(10^3\text{–}10^4\times\) below \(G/2\pi\); screws have \(\boldsymbol{l}\parallel\boldsymbol{b}\) (cross-slip), edges have \(\boldsymbol{l}\perp\boldsymbol{b}\), and a closed loop shares one \(\boldsymbol{b}\).
2. Under the FS/RH Burgers-circuit convention and Frank's \(Gb^2\) energy criterion, which statement holds?
Reversing \(\boldsymbol{l}\) reverses the right-hand loop (\(\boldsymbol{b}\to-\boldsymbol{b}\)); shortest fcc vector is \(\tfrac{a}{2}\langle 110\rangle\); energy drop requires \(b_1^2\gt b_2^2+b_3^2\).
3. Comparing straight screw and positive edge dislocations in an isotropic solid (\(\nu\approx 1/3\)), which statement is true?
Screws are pure shear (\(\sigma_{\mathrm{m}}=0\)); edges carry hydrostatic lobes and \(E_e=E_s/(1-\nu)\approx 1.5 E_s\); stresses decay as \(1/r\) and \(\boldsymbol{F}\perp\boldsymbol{l}\).