“Though I had studied the microscopical structure of rocks for many years, I was altogether unprepared for the wonderful complexity of structure which was soon revealed in iron and steel.”Henry Clifton Sorby · J. Iron Steel Inst. (1887)
At the water-quenched end, \(0.4\%\;\mathrm{C}\) plain-carbon steel and \(\mathrm{Cr\text{–}Ni\text{–}Mo}\) steel both reach HRC 57–58—why does plain-carbon steel soften past \(8\text{ mm}\), whereas 4340 alloy steel stays martensitic beyond \(50\text{ mm}\)?
As-quenched steel gears shatter on impact—what four tempering stages trade extreme hardness for toughness, and why does slow cooling past \(500\,^\circ\mathrm{C}\) fall into reversible Type II temper embrittlement?
Why does the glass transition \(T_{\mathrm{g}}\) shift with cooling rate without latent heat, how do multi-component rules cast \(1.9\text{ GPa}\) bulk metallic glasses, and how does phase-change memory reconcile nanosecond switching with 10-year retention?
Chapter 11 engineering finale: TTT/CCT & Jominy hardenability \(\to\) annealing, normalizing, quenching, four tempering stages & surface hardening \(\to\) Al-alloy T4/T6/T7 aging \(\to\) glass transition & Ch. 11 synthesis.
580 °C (Q&T)
| Transformation Family | Free-Energy Curvature / Barrier | Atomic Migration Channel | Signature Kinetics & Scale | Engineering Applications |
|---|---|---|---|---|
| Precipitation & Pearlite | \(G''\gt 0\) · barrier incl. \(\Delta G_{\mathrm{strain}}\) | Long-range diffusion (\(\sqrt{Dt}\) / lateral) | Avrami \(1-\mathrm{e}^{-kt^n}\) · LSW \(\bar{r}^3\propto t\) · \(\lambda\propto\Delta T^{-1}\) | Al T4/T6, anneal / norm. / Q&T steels |
| Spinodal Decomp. | \(G''\lt 0\) · zero-barrier instability | Uphill diffusion (\(\tilde{D}\lt 0\)) | Cahn \(\beta(k)\) · nano-wavelength \(\lambda_m=2\pi/k_m\) | Modulated alloys, Alnico magnets |
| Massive & Bainite | Undercooled below \(T_0\) (\(G^\alpha=G^\gamma\)) | Incoherent jump / shear + \(\mathrm{C}\) diffusion | \(v=M_{\mathrm{int}}|\Delta G|\) · \(T_0\) incomplete reaction | Weld HAZ massive \(\alpha\), bearing lower bainite |
| Martensite & Ferroic | Overcomes \(\Delta G^*_{\mathrm{req}}\) or Landau double well | Diffusionless cooperative shear / shift | 24 Bain/K–S variants · \(E_c\) switching · Curie–Weiss | Quenched/TRIP steel, \(\mathrm{NiTi}\), PZT, \(\mathrm{Nd_2Fe_{14}B}\) |
| Glass Transition | Kinetic freeze-in (no \(\Delta H\), no \(\Delta V\)) | VFT viscosity surge freezes free volume | \(\eta(T_{\mathrm{g}})\approx 10^{12}\text{ Pa·s}\) · \(T_{\mathrm{rg}}=T_{\mathrm{g}}/T_{\mathrm{l}}\) | Vitreloy BMGs, amorphous cores, PCM |
Peak HRC at the quenched end is set by carbon, whereas substitutional \(\mathrm{Cr,Mo,Ni}\) partition slowly and exert solute drag to shift the TTT nose right, hardening thick shaft cores; quenched steel requires four tempering stages to precipitate carbides for toughness (fast-cooled past \(500\,^\circ\mathrm{C}\) with \(\mathrm{Mo}\) to prevent \(\mathrm{P/Sb}\) Type II embrittlement), whereas Al at room \(T\approx 0.32T_{\mathrm{m}}\) clusters coherent GP zones via quenched-in vacancies (T4).
\(T_{\mathrm{g}}\) marks kinetic freeze-in at \(\eta\approx 10^{12}\text{ Pa·s}\) (zero latent heat, higher upon fast cooling) that averts Kauzmann's paradox; multi-component deep eutectics obeying Inoue's rules lift \(T_{\mathrm{rg}}=T_{\mathrm{g}}/T_{\mathrm{l}}\gt 0.6\) to cast dislocation-free \(1.9\text{ GPa}\) bulk metallic glasses at \(1\text{ K/s}\).
Chapter 11 complete. Up next — Chapter 12 · Dislocations, Plastic Deformation & Recrystallization: theoretical shear strength gap, Burgers vector, Frank–Read sources, and the four strengthening mechanisms.
1. A steel austenitized at \(850\,^\circ\mathrm{C}\) has its TTT nose at \((1\text{ s},\,550\,^\circ\mathrm{C})\): what is \(v_c\)? And why does AISI 4340 (\(\mathrm{Ni\text{–}Cr\text{–}Mo}\)) steel harden far deeper than AISI 1045 (\(0.45\%\text{ C}\)) steel?
\(v_c\approx(850-550)/1=300\,^\circ\mathrm{C/s}\); carbon sets max HRC, while substitutional \(\mathrm{Cr,Ni,Mo}\) slow decomposition and shift the nose right.
2. Which process plan for an AISI 1045 (\(0.45\%\text{ C}\)) drive shaft and temper-embrittlement control is completely sound?
High-\(T\) tempered martensite (Q&T, HRC 25) machines cleanly before induction hardening (HRC 52); \(\mathrm{Mo}\) + fast cooling past \(500\,^\circ\mathrm{C}\) prevents \(\mathrm{P/Sb}\) Type II embrittlement.
3. Which statement accurately characterizes the glass transition \(T_{\mathrm{g}}\) and bulk metallic glasses (BMGs)?
\(T_{\mathrm{g}}\) rises with cooling rate with no latent heat or \(\Delta V\); dislocation-free BMGs reach ~\(2\%\) elastic limit and deform via localized shear bands.